Bolt placement discussion

Ask. Answer. Discuss. Any bolting related issues.
Post Reply
User avatar
NatureBoi
Posts: 410
Joined: Mon Feb 01, 2010 11:23 am
Real Name: Cormac Tooze
Location: Cape Town

Bolt placement discussion

Post by NatureBoi » Thu Apr 25, 2019 11:38 am

I overheard a discussion recently where a tall climber bolted a route in the hard range. He had consulted other climbers to check his placements. I also know this bolter does make allowances for different physiology's.
The route had seen a 2nd ascent shortly after.
Another shorter climber of exceptional experience tried the route but complained about the bolting.
Their view was that the bolt was placed in such a way that they had to do the hard move and beyond and then clip. They were wanting the route bolted in such a way that the bolt placement would enable them to pull/ aid that section.
They felt that they physically could not climb the route ground up and used a cheat stick in places to get to the top of the route.

I have heard of this style of bolting before and am interested in what people have to say about it.
Does it only apply to hard routes?

Cheers
Cormac

User avatar
Justin
Posts: 3820
Joined: Sat Apr 30, 2005 8:31 am
Real Name: Justin Lawson
Location: Montagu/Cape Town
Contact:

Re: Bolt placement discussion

Post by Justin » Thu Apr 25, 2019 1:40 pm

NatureBoi wrote:
Thu Apr 25, 2019 11:38 am
I have heard of this style of bolting before....

Bad bolting style perhaps!?

The usual reason for having bolts in place is to keep the climber(s) safe. There are some routes where bolts are placed badly and the route gets a reputation and/or the bolt is moved/a bolt is added.

Often on harder routes, bolts are closer together so that the first ascensioninst and others trying the route can work it easier.
Climb ZA - Administrator
justin@climbing.co.za

vinceB
Posts: 25
Joined: Tue Sep 30, 2014 5:19 pm

Re: Bolt placement discussion

Post by vinceB » Thu Apr 25, 2019 2:34 pm

I must say I don't see the problem there. First, it's not a big issue whether it's a hard or an easy route. The only issue that matters is the potential for a ground fall.
Is there a potential grounder if you have to do the crux and then clip ? If yes it's bad bolting.
Is it high up ? Then the only risk is to bruise your ego... You can't do the crux, then aid climb using draws to do a ladder or improvise with an escape biner.

Lots of famous crags are bolted like this : Céüse, Tarn, RRG, Chulilla, Siurana etc. Some routes have a special feeling to it and, as long as they are safe, things are fine.

micky
Posts: 225
Joined: Mon Dec 19, 2005 10:03 am
Location: Cape Town

Re: Bolt placement discussion

Post by micky » Thu Apr 25, 2019 3:32 pm

agreed, it's badly bolted if it's unsafe firstly and then if you have to clip mid crux or deviate off the natural line to clip. Otherwise, if it's run out, you cant clip after the crux etc, that's just the way it is, climb harder. I prefer the style like in France where the run outs get longer the higher and safer you get, it's very rare to be able to pull from one bolt to the next to work routes there, you have to climb it.

User avatar
tygereye
Posts: 240
Joined: Fri May 27, 2005 7:34 am
Real Name: Brenda Marx
Location: Stellenbosch

Re: Bolt placement discussion

Post by tygereye » Fri Apr 26, 2019 9:10 am

If the potential fall is safe, there's no issue.
Like VinceB said, it's only your ego that gets injured.
(and that's not always a bad thing - it can actually be character building)

User avatar
Gustav
Posts: 660
Joined: Mon Jul 18, 2005 3:49 pm
Location: Waterval Boven

Re: Bolt placement discussion

Post by Gustav » Fri Apr 26, 2019 7:12 pm

If you’re lacking in altitude and struggling to clip bolts, invest in one of these next time you go to Europe - https://www.kong.it/en/2-products/items ... p420-panic

Normally found on the bottom shelves...
Gustav
Roc 'n Rope Adventures
Waterval Boven
+27 13 120 4600
climb @t rocrope dot com

Post Reply