Rope marking?

Post here for all your gear questions, rants and raves. Ask about gear before you buy it and find out what others are using. NOTE: this forum is NOT for gear sales.

PierreAckermann
Posts: 84
Joined: Tue Feb 26, 2008 9:33 am
Location: Johannesburg

Rope marking?

Postby PierreAckermann » Wed May 28, 2008 3:36 pm

Hi All,

I feel n little stupid but...I marked both my ropes with BEAL rope marker but now the place where I marked the rope is stiff and the rope does'nt have the flexibility that it use to have,will this weaken the rope(I did put quite a lot of the stuff on there...) I anxiously await your replies.

Thank you.

M@
Posts: 80
Joined: Thu Mar 06, 2008 4:37 pm
Real Name: Mathieu Schneuwly
Location: Durban

Postby M@ » Thu May 29, 2008 9:43 am

throw them both away and buy new ropes!

i joke. I would assume that the beal stuff is thouroughly scrutinized and guaranteed not to cause damage (chemically, microstructurally or otherwise) to the rope.

BUT i imagine that if you put too much on the rope causing it to become stiff, then the MECHANICAL properties of the section of rope would be affected..?
i.e. not dynamic and therefore weakened?

That is purely speculation i have no experience or wisdom in this matter.

Personally ive wanted some beal marker for my rope for some time, but now id prefer to buy my next rope with a factory middle-mark.

Russell Warren
Posts: 237
Joined: Wed May 04, 2005 7:25 am
Real Name: Russell Warren
Location: Durban

Postby Russell Warren » Thu May 29, 2008 10:54 am

It will soften with use. Don't panic.

Carl
Posts: 39
Joined: Fri Mar 31, 2006 1:18 pm

Postby Carl » Fri May 30, 2008 9:53 am

I got a rope with a factory middle marker and it worried me the first time it went through my reverso. It crunched a bit and slowed down but it hasn't worried me. I am pretty sure that it's only the sheath that's got a bit stiffer with the marker and the core is still doing its job.

Alex B-S
Posts: 21
Joined: Mon Sep 03, 2007 5:55 am

Postby Alex B-S » Sat May 31, 2008 8:55 am

I have a bottle of Beal Rope Marker and ro-do my ropes from time to time as the old marking fades. It is normal for the marked area to be a bit stiff when newly marked but will return to normal after a bit of use.

andrew p
Posts: 342
Joined: Thu Aug 10, 2006 5:38 pm

Postby andrew p » Sun Jun 01, 2008 2:51 pm

I find that the best way to know where the middle is without marking the rope is with a tape measure, I always carry it on my harness. It can be inconvenient but you get used to it.

User avatar
emile
Posts: 725
Joined: Mon Dec 10, 2007 7:41 am
Real Name: OneDog

Postby emile » Sun Jun 01, 2008 4:53 pm

3M or Stanley?

PierreAckermann
Posts: 84
Joined: Tue Feb 26, 2008 9:33 am
Location: Johannesburg

Postby PierreAckermann » Mon Jun 02, 2008 10:12 am

Thanks guys, I feel quite relieved now,still not particularly fond of the stiffness.

Next time I'll pull out the old Stanley 3m for a half way measure...

Fool
Posts: 124
Joined: Thu May 05, 2005 11:27 pm
Real Name: Michael Baleta
Location: Kommetjie
Contact:

Postby Fool » Tue Jun 03, 2008 7:24 pm

Hiatus of 100 Ma ensued
MadMike

User avatar
proze
Posts: 386
Joined: Mon Mar 26, 2007 10:57 am
Real Name: Paul P
Location: CT

Re: Rope marking?

Postby proze » Mon Jul 28, 2008 10:20 am

What?

Not having a little bottle of Beal stuff, and having a new Beal rope with no middle marker, what can I use to safely mark the middle? Will veggie dye/food colouring be alright?

nosmo
Posts: 372
Joined: Thu Jul 13, 2006 1:34 pm
Location: Under my bed

Re: Rope marking?

Postby nosmo » Mon Jul 28, 2008 10:57 am

Disciple wrote:not particularly fond of the stiffness.

Did the same thing to my rope, I rubbed it a bit and the stiffness went away.

PierreAckermann
Posts: 84
Joined: Tue Feb 26, 2008 9:33 am
Location: Johannesburg

Re: Rope marking?

Postby PierreAckermann » Mon Jul 28, 2008 12:32 pm

ja, thanks nosmo, been climbing and it seems to be much better now. Still not a fan though...

Chalk
Posts: 132
Joined: Thu Jul 28, 2005 11:59 am
Real Name: Andrew Blanche
Location: Pretoria / Johannesburg

Re: Rope marking?

Postby Chalk » Mon Jul 28, 2008 1:21 pm

alternative I have tried and founds works really well with no damage to the rope. I took a 5cm / 3mm strip of ripstop nylon and wove it into the mantle with a blunt nose needle, leaving about 5mm free at either end. Its easy to see and no chemical harm to the rope.

User avatar
Gustav
Posts: 561
Joined: Mon Jul 18, 2005 3:49 pm
Location: Waterval Boven

Re: Rope marking?

Postby Gustav » Mon Jul 28, 2008 2:25 pm

Thanks Chalk, that sounds like a good solution for a black Beal Joker (9,1mm), seeing that black ink on the joker is not so obvious to spot!
Gustav
Roc 'n Rope Adventures
Waterval Boven
013 257 0363
climb @t rocrope dot com


Return to “Gear Questions & Reviews”

Who is online

Users browsing this forum: No registered users and 1 guest