Cedar Rouge

Let everyone know about any suspect/dodgy/misplaced bolts to be renewed or avoided.
Post Reply
RyanCT
Posts: 42
Joined: Mon Jan 20, 2014 6:40 pm
Real Name: Ryan__

Cedar Rouge

Post by RyanCT » Tue Sep 19, 2017 1:38 pm

Hi All,

Last time I was in Rocklands I noticed that the bolts on Cedar Rouge looked pretty dire (still the old square hangers on some of the bolts). I'm heading to Rocklands this long weekend and I would like to rebolt the route. I'm willing to buy the bolts/hangers/chains and do the work, I just don't have a drill. Is there anyone who would be willing to lend me their drill for the long weekend?

Ciao,
Ryan
Last edited by RyanCT on Wed Sep 20, 2017 6:18 pm, edited 1 time in total.

RyanCT
Posts: 42
Joined: Mon Jan 20, 2014 6:40 pm
Real Name: Ryan__

Re: Rebolting Cedar Rouge - Drill needed

Post by RyanCT » Tue Sep 19, 2017 1:40 pm

Ah, one more thing - Does one need to get permission from anyone, or inform anyone in particular, before _rebolting_ an existing route in Rocklands?

User avatar
Overide
Posts: 69
Joined: Thu Mar 03, 2016 8:58 am
Real Name: Richard Tichauer

Re: Rebolting Cedar Rouge - Drill needed

Post by Overide » Tue Sep 19, 2017 1:45 pm

RyanCT this was discussed a couple of weeks back check the post by douw:
http://climbing.co.za/forum/viewtopic.php?f=12&t=16634

RyanCT
Posts: 42
Joined: Mon Jan 20, 2014 6:40 pm
Real Name: Ryan__

Re: Rebolting Cedar Rouge - Drill needed

Post by RyanCT » Tue Sep 19, 2017 3:49 pm

Hi Richard,

Thanks - I saw that thread but it seems like that discussion mostly concerns the procedure for bolting _new_ routes, and I'm wondering what the procedure is (if any) for rebolting _existing_ routes. I'll post on that thread too though, and contact the MSCA climbing committee anyway just in case.

Assuming that I can get permission to rebolt - still looking for a drill though :)

RyanCT
Posts: 42
Joined: Mon Jan 20, 2014 6:40 pm
Real Name: Ryan__

Re: Rebolting Cedar Rouge - Drill needed

Post by RyanCT » Tue Sep 19, 2017 9:58 pm

Ok. I spoke to Cormac from ARF - As for new routes, no rebolting is allowed without express permission from ARF/MCSA.

I'll just be taking photos of the current bolts this weekend - no drill needed.

mokganjetsi
Posts: 1583
Joined: Fri Dec 15, 2006 12:32 pm
Real Name: Willem Boshoff
Location: Cape Town

Re: Rebolting Cedar Rouge - Drill needed

Post by mokganjetsi » Wed Sep 20, 2017 11:17 am

Stoked to hear you want to re-bolt - some of those bolts are dodgy. But check, I think a couple of the crucial bolts are newer ones (?). And bolt placement on that route is crucial. Thanks for taking it on though :thumleft:

rasmus
Posts: 19
Joined: Sat Jul 12, 2014 10:11 pm

Re: Rebolting Cedar Rouge - Drill needed

Post by rasmus » Wed Sep 20, 2017 11:52 am

Been up recently. As Mokganjetsi says, some, safety crucial, bolts are new (-ish), others old (-school).
The bolts at the anchor are solid, as far as I remember, but the chains are a bit rusty...

User avatar
Xenomorph
Posts: 387
Joined: Mon Feb 01, 2010 11:23 am
Real Name: Cormac Tooze
Location: Cape Town

Re: Rebolting Cedar Rouge - Drill needed

Post by Xenomorph » Wed Sep 20, 2017 2:54 pm

1) People need to research before posting.
2) How many bolts have snapped in Cederberg.
3) Rust does not mean potential failure.
4) hangers are easily replaceable, bolts not so.

Peace and Love,
Cormac

mokganjetsi
Posts: 1583
Joined: Fri Dec 15, 2006 12:32 pm
Real Name: Willem Boshoff
Location: Cape Town

Re: Rebolting Cedar Rouge - Drill needed

Post by mokganjetsi » Wed Sep 20, 2017 3:13 pm

To support Cormes' - why not speak to an experienced bolter who is also familiar with the route?
I think it is a good idea to replace the old-school home-made stuff with gear we know is rated though.

User avatar
Xenomorph
Posts: 387
Joined: Mon Feb 01, 2010 11:23 am
Real Name: Cormac Tooze
Location: Cape Town

Re: Rebolting Cedar Rouge - Drill needed

Post by Xenomorph » Wed Sep 20, 2017 4:39 pm

mokganjetsi wrote:
Wed Sep 20, 2017 3:13 pm
To support Cormes' - why not speak to an experienced bolter who is also familiar with the route?
I think it is a good idea to replace the old-school home-made stuff with gear we know is rated though.
Ta, could be as easy as swapping out the hangers, which we have, but let's get the photo's and take it from there.
Cheers
Cormes

Brussel
Posts: 240
Joined: Mon Jan 23, 2006 1:52 pm

Re: Cedar Rouge

Post by Brussel » Thu Sep 21, 2017 7:24 am

The Last time I was on Cedar rouge (many years back) I skipped the last bolt due to pump and then whipped at the chains. I almost strung my second through the first quick draw. If you know how thin he is you realize this was a real possibility :lol: As I fell I remember praying that the bolts would hold.

It's not just the hangers, from what I remember Many of the the bolts are old high tensile cap screws and really do need replacing

User avatar
Xenomorph
Posts: 387
Joined: Mon Feb 01, 2010 11:23 am
Real Name: Cormac Tooze
Location: Cape Town

Re: Cedar Rouge

Post by Xenomorph » Thu Sep 21, 2017 8:00 am

Once we have all the correct information we will make an assessment.
Cheers
Cormac

Post Reply